Structural characteristics
• The use of column fixed rotor design, with higher oil distribution accuracy and mechanical efficiency.
• Dual rolling bearing design with greater lateral load capacity.
• Reliable shaft seal design, withstand high back pressure, can be used in series parallel.
• Easy forward and reverse conversion, stable speed.
• A variety of oil ports, output shafts, flanges and other connection forms.
1.Z large working pressure refers to the entrance Z large pressure, rated pressure refers to the working pressure difference.
2. The motor can not work under Z high pressure and Z high speed at the same time.
3. Under intermittent working conditions, the running time shall not exceed 10% per minute.
4. Recommended to use 68# anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO18/13.
5.Z high working oil temperature 80°.
6. Before the full load of the motor, it should be run in less than 40% of the Z high working pressure for 1 hour.
7. The motor allows Z high back pressure of 10MPa, but it is recommended not to exceed 5MPa, and the leakage pipe should be connected when it exceeds.